
{{ variable.name }}



One body, two temperatures. This reefer truck carries an insulated bulkhead that splits the body into two zones, each with a second evaporator and its own thermostat, so a single run can deliver -18°C frozen product and +2 to +8°C chilled product without a second vehicle. A sliding bulkhead lets the split follow the day order: more frozen space in the morning, more chilled space after the first drops. As with every reefer in the range, the unit is sized for the coldest set point required, so the frozen zone sets the refrigeration capacity while the chilled zone is held by its own control.
| Item | Specification |
|---|---|
| Zones | Two, split by an insulated bulkhead with a second evaporator and its own thermostat |
| Typical zone set points | Frozen -18°C and chilled +2 to +8°C; band coverage such as -20 to +12°C in one body |
| Partition construction | Insulated FRP panel with stainless frame, sealed at floor, walls and roof; sliding bulkhead option |
| Air delivery | Evaporator with two or three fans; air chute or duct on long bodies |
| Floor | Aluminium T-section rails or full T-floor; 100-150 mm insulated floor |
| Wall panel | FRP 1.5-2.0 mm skins over polyurethane 80-120 mm, 100 mm standard |
| Load line | Bulkhead clearance and painted load line keep cargo off the evaporator |
| Doors | Rear double doors standard; side door, strip curtain or roller shutter |
| Refrigerant | R404A standard, low-GWP option on request |
| Body volume and pallets | 10-45 m3; 4-14 pallets (1,200 x 800 mm and 1,200 x 1,000 mm) |
| Body internal size | Length 3,800-9,600 mm, width 2,000-2,450 mm, height 1,800-2,500 mm |
| Control | Digital set point with cab display, high and low temperature alarms |
| Warranty | 12 months major components; unit under unit supplier terms |
Body skins are FRP/GRP 1.5-2.0 mm with a food-grade gel coat inside over rigid polyurethane of 38-45 kg/m3 foamed under about 120 kPa. The partition is an insulated FRP panel in a stainless frame, sealed at floor, walls and roof so the zones do not exchange air. Rear door frame, hinges, locks and handles are stainless, the gasket is multi-lip EPDM, flooring is aluminium T-section rails or checker plate over an insulated base, and lining is food-grade FRP or stainless steel 304 with coved corners.
Zone size, bulkhead type, door arrangement and interior fittings are set at build. Left-hand and right-hand drive, Euro II to Euro V engines, tropical cooling for 45°C ambient, cold-start packages and a low-GWP refrigerant option are confirmed with the order, and sales engineers ask how many stops and door openings a day the route involves before fixing the layout.
Tell us the two set points, the frozen and chilled volumes needed through the day, the number of stops and door openings, and whether the split must change between trips. Sales engineers then fix partition type, unit capacity, doors and interior layout.
Tel: +86-13083602803 · WhatsApp: +86-16638078903 · Email: info@elorry-ind.com · Zhengzhou City, Henan Province, China
reefer-truck-multi-temp-partition.png — Multi-temperature reefer truck with insulated partition for two cargo zones.
reefer-truck-multi-temp-bulkhead-interior.png — Interior of a two-zone reefer body with insulated bulkhead.
reefer-truck-multi-temp-dock-loading.png — Multi-temperature reefer truck loaded at a distribution centre dock.