
{{ variable.name }}

The ELORRY 8x4 heavy tipper truck uses a 32,000 kg GVW and 8x4 drive for high-volume quarry and aggregate work. Body volume is about 16-22 m³. The rigid tipper payload range is 1,500-20,000 kg, with the 8x4 class at the top of that range. The steel tipping body uses Q235 or Q345, a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall; wear-resistant plate is optional for rubble and rock. Tipping angle is 45-55° and lifting time is 12-25 s. Larger tippers ship by flat rack, RoRo or bulk vessel.
The 32,000 kg GVW and 8x4 drive match high-volume quarry and aggregate routes where local axle-load limits allow this class.
About 16-22 m³ supports high-volume crushed rock, sand, gravel and construction aggregate haulage with fewer runs.
The rigid tipper payload range is 1,500-20,000 kg, and the 8x4 class sits at the top of that range for heavy material hauling.
Q235 or Q345 steel, 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall handle rubble and rock; wear-resistant plate is optional.
One 8x4, 400 hp tipper batch was delivered to a construction and quarry contractor in Panama in April 2024 and had about 31 months in service at record time.
| Item | Specification |
|---|---|
| GVW class | 32,000 kg |
| Drive | 8x4 |
| Body volume | About 16-22 m³ |
| Body internal size range | L 2,400-7,600 mm × W 1,800-2,450 mm × D 400-1,400 mm |
| Tipping angle | 45-55° |
| Lifting / lowering time | 12-25 s / 10-20 s |
| Working pressure | 160-200 bar |
| Engine | Diesel 4 or 6 cylinders, 2.8-9.5 L, 130-400 hp |
| Emission | Euro II, III, IV or V; Euro VI on request |
| Transmission | 6-12 forward speeds, 1-2 reverse, manual; AMT optional |
| Tipping control | Gearbox PTO driving the tipping pump, in-cab control |
| Brakes | Dual-circuit air brake, ABS, engine exhaust brake; retarder optional |
| Steering | Hydraulic power steering; left-hand or right-hand drive |
| Tires | 195/75R16 to 12R22.5, tubeless standard |
| Fuel tank | 80-400 L |
| Maximum speed | 80-100 km/h; speed limiter available |
| Minimum turning radius | 5.5-9.5 m |
| Working temperature | -20 to 45°C with cold-start and tropical packages |
| Warranty | 12 months for major components with spare-parts support |
| Lead time | About 30 days for orders under 20 units; stock models ship faster |
| Configuration | Options |
|---|---|
| GVW class | 32,000 kg |
| Drive | 8x4 |
| Body volume | About 16-22 m³ |
| Body styles | Steel, aluminum, triple-drop-side, three-way, tool carrier |
| Cab | 2-3 persons, day cab standard, sleeper cab optional |
| Emission | Euro II, III, IV or V; Euro VI on request |
| Steering | Left-hand or right-hand drive |
| Load cover | Manual roll-over sheet or electric tarpaulin system |
The tipping body uses Q235 or Q345 high-strength structural steel, with a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall. Cross bearers support the floor, and wear-resistant plate is optional for rubble and rock. The subframe is bolted and rubber-mounted to the chassis rails to spread tipping loads. The chassis is a carbon structural steel ladder frame with reinforced cross members. The cab is a welded steel body with tempered glass and anti-corrosion coating. Hydraulics use a hard-chrome-plated telescopic cylinder, high-pressure hose and steel pipe. The tailgate can be top-hinged or pendulum type with manual or automatic release. The load cover can be PVC tarpaulin or aluminum roll-over slats.

A construction and quarry haulage contractor in Panama ordered one batch of 8x4, 400 hp tipper trucks for heavy material hauling. The batch was delivered in April 2024 and had been in service for about 31 months at the time of the record. The client reported excellent performance and build quality; this is qualitative feedback without measured data. The order used one-to-one configuration on request, with quality control from design stage through to ex-works.
32,000 kg GVW with 8x4 drive, for high-volume quarry and aggregate work where local axle-load limits allow this class.
About 16-22 m³. The full rigid range is 2-22 m³, with 4x2 about 2-6 m³ and 6x4 about 8-16 m³.
The rigid tipper payload range is 1,500-20,000 kg, with the 8x4 class at the top of that range.
Lifting takes 12-25 s, lowering 10-20 s, with a 45-55° tip angle and 160-200 bar working pressure.
Diesel 4 or 6 cylinder engines, 2.8-9.5 L, 130-400 hp, with Euro II, III, IV or V; Euro VI on request.
The case involved one batch of 8x4, 400 hp tipper trucks for construction and quarry haulage, delivered in April 2024 and in service for about 31 months at record time.
12 months for major components with spare-parts support. Lead time is about 30 days for orders under 20 units; stock models ship faster.
Share your material density, site access, tip height, bridge and axle limits, and local registration class. ELORRY sales engineers will recommend the GVW, body volume and tipping direction for your route.
Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China