
{{ variable.name }}
The ELORRY 8x4 heavy duty tipper truck is specified for mining, quarry and infrastructure work. A 300-320 mm ladder frame of Q345 high-strength steel carries a wear-resistant NM400/NM450 tipping body, with rear or side tipping for ore, coal, overburden and aggregate. Rated payload is 15,000-45,000 kg depending on body type, and gradeability of 25-35% suits loaded climbs out of pits and quarries.
Power comes from a 300-560 hp turbocharged and intercooled diesel with a 9-16 speed manual or optional AMT gearbox, matched to a heavy-haul axle ratio. Inter-wheel and inter-axle differential locks are optional, and a power take-off drives the tipping pump.
The tipping body uses wear-resistant steel for ore, coal and overburden, extending body life in abrasive quarry work.
Payload and body size are balanced against axle loads within local road regulations.
Tipping direction is chosen for the site layout and discharge point.
Inter-wheel and inter-axle locks help traction on loose and uneven site roads.
Power take-off and pump drive are built into the driveline for the tipper body.
Gearing selected for loaded climbs out of pits, quarries and construction sites.
| Item | Specification |
|---|---|
| Drive configuration | 8x4; 6x4 dump and 6x6 off-road also available |
| Rated payload | 15,000-45,000 kg depending on drive and body |
| Tipper body | Rear or side tipping; NM400/NM450 wear-resistant steel |
| Frame | Q345 ladder frame, 300-320 mm deep, 8-10 mm thick |
| Engine | Diesel 6-cylinder turbocharged, 300-560 hp, 1,200-2,600 N.m |
| Transmission | 9-16 forward speeds and 2 reverse; AMT optional |
| Axles | Front 7,500-9,000 kg; rear 13,000-16,000 kg each, tandem |
| Gradeability | 25-35% depending on driveline and load |
| Brakes | Dual-circuit air brake, ABS standard, spring parking brake |
| Tires | 12.00R20, 12R22.5 or 315/80R22.5 |
| Emission | Euro II, III, IV or V; Euro VI on request |
The ladder frame is Q345 high-strength structural steel, 300-320 mm deep and 8-10 mm thick, with reinforced cross members and gussets. The tipping body uses Q235/Q345 structural steel with NM400/NM450 wear-resistant steel for mining and quarry duty. The cab is a welded steel body with tempered glass, electrophoretic primer and anti-corrosion coating, and the tipping cylinder is hard-chrome-plated with high-pressure hoses and brass or stainless fittings.
Mining and quarrying of ore, coal and overburden; construction and infrastructure including roads, bridges, tunnels, dams and airports; site haulage at mining camps and remote project sites; aggregate and bulk commodity transport.
Custom RAL color, company logo and fleet unit numbers. Cold package with fuel heater and engine preheater for -30°C starts, or tropical package with reinforced radiator, dust shield and high-capacity air conditioner for hot climates. Fleet equipment including telematics, GPS, driver fatigue camera and tire pressure monitoring can be added.
8x4 heavy duty truck batch - El Salvador, mining and construction fleet operator. Delivered June 2025 and in service for approximately 17 months at the time of feedback. Application covers heavy-duty hauling for mining, construction and infrastructure works. The client highlighted the reinforced structure, powertrain performance and cab comfort, and provided written feedback on quality and delivery efficiency, rating the team as professional and reliable. No KPI figures are available.




The tipping body uses NM400/NM450 wear-resistant steel for ore, coal and overburden haulage.
Both are available and selected against the site layout and discharge point.
Rated payload is 15,000-45,000 kg depending on drive configuration and body type, balanced to local axle-load rules.
Yes, inter-wheel and inter-axle differential locks are optional for loose and uneven site roads.
Yes. A cold package with fuel heater, engine preheater and winter-grade lubricants supports -30°C operation.
Each unit completes a static check, brake test, road test and load test, backed by a 12-month major-component warranty.
Share your site conditions, payload target and tipping direction to receive a body drawing and axle-load table. Contact ELORRY at info@elorry-ind.com or WhatsApp +86-16638078903. Mixed body types can be consolidated in one shipment under FOB, CIF or DAP terms.