
{{ variable.name }}
An 8x4 wide-body mining dump truck rated at 80,000-100,000 kg for high-tonnage open-pit, quarry and coal haul cycles on off-highway roads.



The 80-100 t 8x4 wide-body mining dump truck is the high-tonnage wide-body unit in this range. It uses a rigid 8x4 chassis and a rock body with an integral box frame for ore, overburden, coal and blasted rock on mine and quarry haul roads.
The unit is delivered for off-road duty only. It is not intended for public highway operation, and its payload class should be matched to ramp width, bridge limits and the crusher opening at the dump point.
| Specification | Value |
|---|---|
| Drive configuration | 8x4 wide-body mining dump truck |
| Rated payload | 80,000-100,000 kg |
| Kerb weight and GVW | Kerb weight 25,000-45,000 kg; GVW 70,000-150,000 kg |
| Body capacity | 25-50 m3 struck; 30-60 m3 heaped |
| Body plate | NM400/NM450; floor 12-20 mm; side 8-14 mm; front 10-16 mm |
| Engine | Non-road diesel, 6 cylinders in line, turbocharged and intercooled, 350-770 hp (260-570 kW), 9-16 L, torque 1,500-3,300 N.m |
| Transmission | 8-9 speed manual or powershift automatic |
| Tipping system | Front-mounted multi-stage telescopic cylinder, 2-4 stages; 50-55 degrees; lift 18-25 s; lower 15-20 s |
| Max speed | 40-50 km/h on haul road |
| Gradeability | 25-32 percent on a dry haul road |
| Cab | Single-side offset, 1-2 seats, ROPS/FOPS, left-hand or right-hand drive |
| Tires | OTR 14.00-25, 16.00-25, 18.00-25 or 875/65R29 |
The 8x4 wide-body covers the 80,000-100,000 kg class. Body options include liner plates at the floor and tail, heated floor for wet or frozen material, extended side boards, and a rock box with reinforced tail chute. Cold, dust, safety and fleet packages are available, and the body can ship assembled or knocked down for local assembly.
The body uses NM400/NM450 wear-resistant steel plate, welded into an integral box frame with impact beams and a body-side canopy over the cab. Q345 structural steel is used for the body frame, brackets and tail chute. The chassis frame is high-strength low-alloy steel, 8-14 mm, bolted or welded into a box section with cross members and gussets at the load points.
The cab is a welded steel shell with ROPS/FOPS structure, tempered glass, anti-corrosion primer and polyurethane topcoat. Hydraulic cylinders use honed steel tube and hard-chrome plated piston rod. Suspension uses rolled leaf springs and rubber bushes, with hydropneumatic struts on the front axle option.
High-tonnage open-pit coal mining, metal mines such as iron ore, copper, gold, manganese, nickel and bauxite, quarries producing aggregate, granite, basalt and limestone, cement plants, overburden and waste-rock removal, large earthworks, mine contracting fleets, and steel mills or slag yards where an 80-100 t wide-body unit fits the haul road and dump point.
Before the order, sales engineers agree material density, ramp grade, altitude, ambient temperature, dust, dumping height, and the loader or excavator that fills the body. Body size, axle rating, tire type and cooling package follow from those answers. A high-altitude package is available for sites above 3,000-4,500 m, and the fleet package can include telematics, payload monitoring, same paint and sequential unit numbers.
Is this truck for public roads?
No. It is an off-highway dump truck for mine and quarry haul roads and is not intended for public highway operation. Max speed is 40-50 km/h on haul road.
What payload does the 8x4 cover?
The 8x4 wide-body covers 80,000-100,000 kg. Match the final payload to ramp width, bridge limits and crusher opening.
How is body volume set?
A 25-50 m3 struck body is quoted against the density the customer actually hauls, typically 1.6-2.7 t/m3. Heaped capacity is 30-60 m3.
Which wear plate is used?
NM400/NM450 plate at 12-20 mm on the floor, 8-14 mm on the sides and 10-16 mm on the front wall, with replaceable liner plates at floor and tail.
What is the lead time and shipping method?
Lead time is about 30-60 working days from down payment, depending on body size and options. The unit ships by break-bulk vessel or RoRo, 1-3 units per shipment, under FOB, CIF or DAP terms.
What does the warranty cover?
Warranty is 12 months for major components. Wear plates, liners, filters and brake linings are consumables.
Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China