
{{ variable.name }}
Heavier 6x4 rear loader for transfer stations, landfill operations and dense collection routes.
This 6x4 rear loader garbage truck is specified for transfer station and landfill operations where the 4x2 city unit is too light. It carries a 10-20 m3 body, 10,000-18,000 kg payload and a 12-18 t compaction force. The sealed body and discharge door support high daily tonnage, while diesel engines from 90 to 300 hp in Euro II to Euro V can be matched to local fuel quality.
The heavier chassis is aimed at transfer station and landfill work.
Body volume can be fixed around route tonnage and tipping frequency.
The packer plate works at a 2:1 to 3:1 ratio for denser loads.
A rear door rubber seal and drain valve support cleaner transfer work.
The discharge cycle takes about 40 s at landfill or transfer points.
Gear pump, hard chrome rods and imported seals support multi-shift use.
| Parameter | Specification |
|---|---|
| Body type | Rear-loader compactor |
| Drive | 6x4 |
| Payload | 10,000-18,000 kg |
| GVW range | 4,500-26,000 kg |
| Body capacity | 10-20 m3 |
| Compaction ratio | 2:1 to 3:1 |
| Compaction force | 12-18 t |
| Discharge force | 8-18 t, about 40 s |
| Bin lift | 120-1,100 L, 6-15 s cycle |
| Hydraulic pressure | 18-21 MPa |
| Engine | Diesel 90-300 hp, Euro II to Euro V |
| Cab | 2-3 persons, LHD or RHD |
This 6x4 rear loader sits above the 4x2 city models: the 5-8 m3 unit at 9,490 kg GVW and 3,200 kg payload, and the 10 m3 unit at 12,490 kg GVW and 4,990 kg payload. The 6x4 layout is intended for 10,000-18,000 kg payload and transfer station work.
The body shell uses Q235/Q345 carbon steel with 4-6 mm side walls and 5-8 mm floor, welded and fully sealed. The rear door has a replaceable EPDM rubber seal. The packer plate, ejector and push plate are Q345 wear-resistant steel with replaceable wear strips. Hydraulic cylinders use 45# steel barrels, hard chrome-plated piston rods and imported seal kits. The leachate tank is stainless steel 304 or epoxy-coated steel.
Transfer stations and landfill operations, municipal solid waste collection for city and district sanitation departments, residential and commercial refuse routes, construction and demolition debris removal, industrial parks, and waste management contractors running high daily tonnage.
Body volume, compaction force, axle layout and bin lift interface are fixed around waste type, bin size, stops per day and tipping point. LHD or RHD, air suspension, cold-start package or tropical cooling are available. Lead time is about 25-40 working days from down payment. Trade terms are FOB, CIF or DAP.
Q: What payload does the 6x4 rear loader cover?
A: The 6x4 configuration is intended for 10,000-18,000 kg payload and transfer station work.
Q: What body capacity is available?
A: Body capacity across the range is 3-20 m3. This 6x4 rear loader is quoted in the 10-20 m3 band.
Q: Is this truck a compactor?
A: Yes. It uses a hydraulic packer plate with about 2:1 to 3:1 compaction ratio and 12-18 t force.
Q: How long does discharge take?
A: The discharge cycle is about 40 s, with 8-18 t discharge force.
Q: Can it work in hot or cold climates?
A: The working temperature range is minus 20 to plus 50 degrees C with tropical cooling or cold-start package.
Q: What is the lead time?
A: About 25-40 working days from down payment.
Henan Elorry Industrial Co., LTD. | Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com | Address: Zhengzhou City, Henan Province, China