
{{ variable.name }}
Prime mover for container chassis and regional shuttle work, built on a 4x2 driveline with a forward-control day cab.
This 4x2 tractor unit is the port and regional workhorse in the ELORRY tractor truck range: a forward-control day cab on a 3,200-3,800 mm wheelbase, rated at GVW 16,000-25,000 kg and a gross combination weight of 25,000-60,000 kg depending on driveline and local axle-load rules. The fifth wheel takes 10,000-16,000 kg and couples at 1,150-1,350 mm, so container chassis, flatbeds and dropside trailers hook up without adapters or shims. It is a road tractor unit for semi-trailer haulage, not an agricultural tractor.
| Vehicle type | Road tractor unit (prime mover) for semi-trailer haulage |
|---|---|
| Drive and tires | 4x2; 6 tubeless tires, 11R22.5, 12R22.5 or 315/80R22.5 |
| GVW / GCW | 16,000-25,000 kg / 25,000-60,000 kg by driveline and local axle-load rules |
| Fifth wheel | 10,000-16,000 kg load; 2 or 3.5 inch kingpin; coupling height 1,150-1,350 mm |
| Wheelbase and size | 3,200-3,800 mm; length 5,800-7,200 mm, width 2,450-2,550 mm, cab height 2,900-3,900 mm; curb weight 6,500-9,500 kg |
| Cab | Day cab, 2-3 persons, forward-control welded steel, four-point suspension, hydraulic tilt |
| Engine | Diesel, 6 cylinders in line, turbocharged and intercooled, 6.5-13 L, 240-560 hp, 900-2,600 N.m |
| Emission | Euro II to Euro V; Euro VI on request, matched to local fuel quality |
| Transmission | 9-16 forward speeds and 2 reverse; manual standard, AMT optional; clutch 395-430 mm |
| Axles and ratio | Front 6,500-7,500 kg; rear 13,000-16,000 kg; ratio 2.85-4.11 highway, 4.11-5.29 mountain and heavy haul |
| Fuel and electrics | 300-800 L aluminum or steel tank, single or twin; 24 V, trailer socket, GPS and telematics pre-wiring |
| Performance | 90-110 km/h with speed limiter; minimum turning radius 7.0-9.5 m; 28-40 L/100 km loaded; -30 to 50 C with cold-start and tropical packages |
The same range covers 6x4 units for line haul and 6x6 off-road tractors for unpaved routes, with day cab, sleeper cab or high-roof sleeper cab bodies. Choose left-hand or right-hand drive, steel or forged aluminum wheels, rear air suspension in place of multi-leaf springs, roof deflector, tool box and spare wheel carrier. AMT, EBS, differential locks and a retarder or engine brake are quoted as options.
The ladder frame is Q345 high-strength structural steel, 280-320 mm deep and 8 mm thick, with bolted cross members and reinforcement gussets. The cab is welded steel with tempered glass, electrophoretic primer and anti-corrosion coating. The fifth wheel is a cast or forged steel plate with hardened locking jaw and grease points. Fuel tanks are aluminum alloy or steel, and air and brake lines use hard-chrome-plated actuators, brass and stainless fittings and high-pressure rubber hoses.
Engine rating and axle ratio are agreed against your gross combination weight, gradient and annual mileage, with highway ratios of 2.85-4.11 and mountain or heavy-haul ratios of 4.11-5.29. Cold package (fuel heater, engine preheater, cab heater) and tropical package (reinforced radiator, dust shield, high-capacity air conditioner) cover -30 to 50 C operation. Fleet equipment such as telematics, GPS, driver fatigue camera, tire pressure monitoring and company livery is quoted at inquiry.
Flatbed, dropside, low-bed, tipper, tanker, container chassis and refrigerated semi-trailers are all listed for the range. Fifth wheel height, kingpin size and air line position are agreed with your trailer supplier before build, so no adapter plates or shims are needed.
Yes. The unit is available in left-hand or right-hand drive, with hydraulic power steering in both cases.
Diesel 6-cylinder in-line engines from 6.5 to 13 L, 240-560 hp and 900-2,600 N.m; 9-16 forward speeds and 2 reverse, manual standard with AMT optional.
About 30 days for orders under 20 units, with stock models shipping faster. Progress photos are shared at chassis, cab and final inspection so replacement dates can be planned.
By RoRo, bulk vessel or flat rack under FOB, CIF or DAP terms. The export set includes invoice, packing list, bill of lading, certificate of origin and insurance. Lifting points and securing plans are agreed before loading.
Every unit completes a static inspection, brake test, road test and fifth-wheel and trailer light test before loading. Major components carry a 12-month warranty with spare-parts support.
Euro II to Euro V as standard, with Euro VI on request, matched to the fuel quality available in your market.



Send your trailer type, expected gross combination weight, axle-load rules in your market, drive side and annual mileage. Sales engineers reply with a configuration, quotation and delivery schedule.