
{{ variable.name }}
A 4x2 rigid haul truck rated at 40,000-70,000 kg, built for overburden, ore and rock haulage where a narrower ramp and a lower payload class fit the site.



The 40-70 t 4x2 rigid mining dump truck is an off-highway hauler for mine and quarry haul roads. It uses a rigid 4x2 chassis with a torque converter, a rock body with an integral box frame, and a single-side offset ROPS/FOPS cab. Rated payload is 40,000-70,000 kg.
This unit is not intended for public highway operation. It suits sites that need a lower payload class than a wide-body 6x4 or 8x4, including mine contracting, quarry benches, overburden stripping and temporary haul roads.
| Specification | Value |
|---|---|
| Drive configuration | 4x2 rigid haul truck |
| Rated payload | 40,000-70,000 kg |
| Kerb weight and GVW | Kerb weight 25,000-45,000 kg; GVW 70,000-150,000 kg |
| Body capacity | 25-50 m3 struck; 30-60 m3 heaped |
| Body plate | NM400/NM450; floor 12-20 mm; side 8-14 mm; front 10-16 mm |
| Engine | Non-road diesel, 6 cylinders in line, turbocharged and intercooled, 350-770 hp (260-570 kW), 9-16 L, torque 1,500-3,300 N.m |
| Transmission | 8-9 speed manual or powershift automatic; torque converter on the rigid haul truck |
| Tipping system | Front-mounted multi-stage telescopic cylinder, 2-4 stages; 50-55 degrees; lift 18-25 s; lower 15-20 s |
| Max speed | 40-50 km/h on haul road |
| Gradeability | 25-32 percent on a dry haul road |
| Cab | Single-side offset, 1-2 seats, ROPS/FOPS, left-hand or right-hand drive |
| Tires | OTR 14.00-25, 16.00-25, 18.00-25 or 875/65R29 |
The 4x2 rigid haul truck covers the 40,000-70,000 kg class. Body options include liner plates at the floor and tail, heated floor, extended side boards, and a rock box with reinforced tail chute. Cold, dust, safety and fleet packages are available, and the body can ship assembled or knocked down for local assembly.
The body is built from NM400/NM450 wear-resistant steel plate, welded into an integral box frame with impact beams and a body-side canopy over the cab. Q345 structural steel is used for the body frame, brackets and tail chute. The chassis frame is high-strength low-alloy steel, 8-14 mm, bolted or welded into a box section with cross members and gussets at the load points.
The cab is a welded steel shell with ROPS/FOPS structure, tempered glass, anti-corrosion primer and polyurethane topcoat. Hydraulic cylinders use honed steel tube and hard-chrome plated piston rod. Suspension uses rolled leaf springs and rubber bushes, with hydropneumatic struts on the front axle option.
Open-pit mines, quarries, aggregate production, coal mines, cement raw material sites, overburden stripping, ore haulage, waste dump disposal, mine contracting and outsourced haulage fleets, hydropower and dam construction, road and rail construction in remote terrain, and mining equipment rental where a 40-70 t rigid unit fits the ramp and dump point.
Before the order, sales engineers agree material density, ramp grade, altitude, ambient temperature, dust, dumping height, and the loader or excavator that fills the body. Body size, axle rating, tire type and cooling package follow from those answers. A high-altitude package is available for sites above 3,000-4,500 m, and the fleet package can include telematics, payload monitoring, same paint and sequential unit numbers.
A mining contractor and quarry operator in DR Congo took 4 units in the 40-50 t payload class. The units handle overburden and ore hauling on open-pit mine haul roads, with a typical project scale of 2 years in service. Reported result: steady haul-cycle availability under continuous duty. The build included a reinforced frame and body for impact loading, high ground clearance, a retarder and cooling package for long descents, and a protective cab.
Is this truck for public roads?
No. It is an off-highway dump truck for mine and quarry haul roads and is not intended for public highway operation. Max speed is 40-50 km/h on haul road.
What payload does the 4x2 cover?
The 4x2 rigid haul truck covers 40,000-70,000 kg. The DR Congo case used a 40-50 t payload class.
How is body volume set?
A 25-50 m3 struck body is quoted against the density the customer actually hauls, typically 1.6-2.7 t/m3. Heaped capacity is 30-60 m3.
What driveline does the 4x2 use?
A non-road diesel engine at 350-770 hp (260-570 kW), 9-16 L and 1,500-3,300 N.m torque, with 8-9 speed manual or powershift automatic transmission and a torque converter on the rigid haul truck.
What is the lead time and shipping method?
Lead time is about 30-60 working days from down payment, depending on body size and options. The unit ships by break-bulk vessel or RoRo, 1-3 units per shipment, under FOB, CIF or DAP terms.
What does the warranty cover?
Warranty is 12 months for major components. Wear plates, liners, filters and brake linings are consumables.
Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China