
{{ variable.name }}
The self-propelled telescopic boom reaches 20.3 m working height and 15.09 m horizontal extension. Its 230 kg basket carries two persons, the turntable gives 360 degrees continuous slew, and the platform rotates 160 degrees so the operator can face the work. It climbs a 45 percent grade and turns in a 2.4 m inside radius for yard and site work where a truck-mounted unit cannot set outriggers.


This unit is the self-propelled telescopic boom in the Elorry access fleet. The quoted 20.3 m working height corresponds to an 18.3 m platform floor height, and both figures are stated so buyers compare the same measurement. The 0.91 x 2.43 m basket is rated 230 kg for two persons. Drive speed is 6.8 km/h stowed and 0.8 km/h elevated, with 360 degrees continuous slew and 160 degrees platform rotation.
It is intended for rough ground and sites where a truck-mounted unit cannot set its outriggers. Dual control boxes are fitted at ground and basket, each with emergency stop and basket priority; a manual pump gives emergency descent.
| Max working height | 20.3 m |
|---|---|
| Platform floor height | 18.3 m |
| Max horizontal extension | 15.09 m |
| Platform rated load | 230 kg, 2 persons |
| Basket size | 0.91 x 2.43 m |
| Rotation | 360 degrees continuous slew |
| Platform rotation | 160 degrees |
| Drive speed | 6.8 km/h stowed and 0.8 km/h elevated |
| Gradeability | 45 percent |
| Turning radius | 2.4 m inside and 5.13 m outside |
| Controls | Ground and basket control boxes, emergency stop, basket priority |
| Safety systems | Anti-drop protection on rotation, harness anchor points, emergency lowering valve and manual pump |
The quoted configuration is the self-propelled telescopic boom with 360 degrees continuous slew, 160 degrees platform rotation and a 230 kg basket. Where the basket must pass a roof edge, billboard or tree crown, an articulated knuckle boom is quoted instead of the straight telescopic boom. A 14 m 4x2 truck-mounted unit and a 15.7 m electric scissor lift can be ordered in the same fleet to share one spare-parts list.
The boom uses welded high-strength steel box section in Q345 and Q460 plate with reinforcement at pivot and hinge points. The turntable and base frame are Q345 steel plate with a machined slew ring and hardened pinions. The basket has a steel or aluminium checker plate floor, 1.1 m guardrails with mid-rail and toe board, and an anti-slip pattern plate with drainage holes. Hydraulic cylinders use honed steel tubes and hard-chrome plated piston rods; hoses are two-wire braided rubber with crimped fittings.
This self-propelled telescopic boom is used on rough ground, yards and sites without a truck. Typical work includes construction, telecom and lighting maintenance, signage, tree care, facilities maintenance, facade inspection and overhead work where the base can be driven close to the task. It is also used where a truck-mounted unit cannot set outriggers.
The order is configured around the 20.3 m working height, 15.09 m horizontal extension, 230 kg basket and 160 degrees platform rotation. A lifting hook, where specified, is rated 1,000 kg as a sling load and quoted apart from the basket load. Export documents are prepared in one set, and units ship by container, flat rack or RoRo under FOB, CIF or DAP terms.
A facility maintenance contractor and power utility contractor in Kuwait ordered 3 units, 18-22 m working height, for street light maintenance, building facade work and overhead line service. After a typical project scale of 2 years in service, the units replaced scaffolding and shortened job time per site. The order specified telescopic or articulated boom options, platform auto-levelling, outrigger interlocks and emergency descent.
The unit has a 20.3 m working height and an 18.3 m platform floor height; both are quoted so buyers compare the same measurement.
Maximum horizontal extension is 15.09 m, and the 0.91 x 2.43 m basket is rated 230 kg for two persons.
The turntable provides 360 degrees continuous slew, and the platform itself rotates 160 degrees.
Gradeability is 45 percent. Drive speed is 6.8 km/h stowed and 0.8 km/h elevated, with a 2.4 m inside turning radius.
No. It is self-propelled and specified for rough ground and sites where a truck-mounted unit cannot set outriggers.
Lead time is about 30-45 working days from down payment.
For configuration and export quotation, contact Henan Elorry Industrial Co., Ltd. Please state working height, horizontal reach, basket load and destination port.
Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China | Website: www.elorry-ind.com